JVC KS-SB200 - Manual (Page 8)

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
8
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Preparations
Turning on the Power
1
Press POWER on the unit.
2
Turn on JVC PnP.
• The sound does not come out when JVC PnP is turned
off.
The power-on lamp lights green.
• When the power-on lamp lights red, the batteries are
almost exhausted. This condition may cause degraded
performance. Replace the batteries.
To turn off the power, press POWER on the unit.
The power-on lamp goes off.
• JVC PnP also turns off.
CAUTIONS:
• Only use the power cord and AC adaptor provided for
this unit to avoid malfunction or damage to the unit.
• Be sure to unplug the power cord from the outlet
when going out or when the unit is not in use for an
extended period of time.
Connecting the AC power cord
Connect the unit to the outlet as described in the illustration
below.
2
1
3
Power-on lamp POWER
AC adaptor
AC power cord
Outlet
Operations Do not connect the AC power cord until
all other connections have been made.
KS-SB200[J]2-10.p65 04.11.10, 10:42 AM 8