JVC GGT0359-001A-H - Manual (Page 4)

4
VIDEO-2 R L V CHANNEL
VOLUME
MENU/OK
TV/VIDEO
2
3
4
5
6
1
Set up and connections
Care when setting
Connect an aerial and VCR / DVD Player
Hole for belt
(under the stand)
Screw for
attach the belt
to the stand
(provided)
200 mm
150 mm 150 mm 50 mm 50 mm
Screw
(not provided) Belt
(provided)
Select the input Source (P. 20)
Display on-screen menu / set
Change channel / Page /
Hyper Scan Function (P. 3)
Volume / Adjust
Power On / Off
Microphone
Power requirements ■
Connect the power cord only to a •
110-240V, 50/60Hz AC outlet.
When attaching the TV to the
■
wall, use the optional JVC wall
mounting unit
Consult a qualifi ed technician.
•
JVC assumes no responsibility for •
damage due to improper mounting.
400 mm x 200 mm mount which
•
conforms to VESA standards.
Installation requirements
■
To avoid overheating, ensure the •
unit has ample room.
After all the connections have •
been made, insert the plug into
an AC outlet.
AERIAL
OR
VCR (DVD Player)
To prevent the TV from falling •
thread the belt through the hole
on the back of the stand and
secure it to the TV rack.
If the microphone is installed, •
should be lock it’s cable follow
picture.
Power lamp
ON : Lit (Blue)
OFF : Unlit
Power lamp lights while
the TV is on.
"Power Lamp" (P. 15) •
Remote control sensor /
Eco Sensor
Stand Assembly Change the direction of TV
GGT0359-001A-H-EN.indd 4 GGT0359-001A-H-EN.indd 4 19/07/2010 14:08:00 19/07/2010 14:08:00