Jabra c330 - Manual (Page 27)

c330 Owner’s Manual 23
A
PPENDIX
Mounting Your c330
Use the enclosed disk to mount your unit to the dashboard.
California drivers, use the enclosed disk to comply with California
regulations. See page 33 for more information.
To mount the disk:
1. Clean and dry the area on your
dashboard where the disk is to be
placed.
2. Remove the backing from the
permanent mounting adhesive on
the bottom of the disk, and place
the disk on the dashboard.
3. Place the c330 (that is still
mounted to the suction cup
mount) on top of the disk. Secure
the suction cup mount to the disk,
following the instructions included
in your Setup Guide.
Important: The permanent mounting adhesive is extremely
difficult to remove after it is installed.
Safely mount your unit. See
page 33 for warnings.
Adjusting the Backlight Brightness
Touch the brightness icon to access the
Set Brightness page.
You can adjust brightness levels of the backlight by touching the
lightbulb icons shown above. Touch - to dim the backlight or + to
increase the brightness. When you are finished, select OK.
Disk
Suction cup
mount