JVC GC-S1 - Manual (Page 21)

EN
21
5 Rotate the MENU Jog Dial to adjust the
exposure.
•The exposure value can be selected from –6
and +6.
To brighten the image:
Increase the exposure value. (maximum +6)
To darken the image:
Decrease the exposure value. (maximum –6)
6
Push the MENU Jog Dial twice.
•The EXPOSURE Setup Screen disappears.
•The exposure value is set and the shooting
screen reappears.
To adjust a previously set exposure value . . .
.... repeat the above procedure from step 1.
NOTE:
To set the exposure value to the standard level, set
the exposure value to “0” or turn the Power Dial to
“
A
”.
P LA
Y
OFF
CAMERA MENU
CAMERA
P I CTURE MODE
SYSTEM
EX I T
CAMERA
EXPOSURE 0
M .W. B . AUTO
SHUTTER
EX I T
SPEED UTO A
EXPOSURE
+
6
EX I T
Exposure Control
When the subject appears too dark or too bright on the LCD monitor, it may be necessary to compensate for
the ambient brightness. This will make it possible to capture the contours of the dark and bright regions of
the image more clearly.
NOTE:
Use the flash when the low light “ ” icon appears.
To darken the image
To brighten the image
Lock button
LCD monitor
CAMERA MENU Screen
MENU Jog Dial Power Dial
CAMERA Setup Screen
EXPOSURE Setup Screen
1 Turn the Power Dial, while pressing its Lock
Button, to “
M ” or “ ” and push the MENU
Jog Dial.
•The CAMERA MENU Screen appears.
2
Rotate the MENU Jog Dial to select
“CAMERA” and push it.
•The CAMERA Setup Screen appears.
3 Rotate the MENU Jog Dial to select
“EXPOSURE” and push it.
•The EXPOSURE Setup Screen appears.
4 Rotate the MENU Jog Dial to select the
current value and push it.
•The item colour changes to indicate that
setting is possible.
MANUAL SHOOTING