JVC KD-R316 - Manual (Page 50)

14 ENGLISH
Category Menu item Selectable setting, [ Initial: Underlined ]
AUDIO
FADER * 3 R06 – F06 [ 00 ] : Adjust the front and rear speaker output
balance.
BALANCE * 4 L06 – R06 [ 00 ] : Adjust the left and right speaker output
balance.
LOUD
Loudness • LOUD ON
• LOUD OFF
: Boost low and high frequencies to produce a
well-balanced sound at a low volume level.
: Cancels.
AUX ADJUST * 5
Auxiliary adjust
(For KD-R316/
KD-R315)
AUX ADJ 00 —
AUX ADJ 05 : Adjust the auxiliary input level to avoid the
sudden increase of the output level when
changing the source to external component
connected to the AUX input jack on the
control panel.
VOL ADJUST
Volume adjust
(For KD-R416/
KD-R415) VOL ADJ –05 —
VOL ADJ +05
[ VOL ADJ 00 ] : Preset the volume adjustment level of
each source (except FM), compared to the
FM volume level. The volume level will
automatically increase or decrease when you
change the source.
• Before making an adjustment, select the
source you want to adjust.
• “VOL ADJ FIX” appears on the display if “FM”
is selected as the source.
L/O MODE
Line output
mode • SUB.W
• REAR
: Select if the REAR LINE OUT terminals are
used for connecting a subwoofer (through an
external amplifier).
: Select if the REAR LINE OUT terminals are
used for connecting the speakers (through an
external amplifier).
SUB.W FREQ * 6
Subwoofer cutoff
frequency
• LOW
• MID
• HIGH
: Frequencies lower than 72 Hz are sent to the
subwoofer.
: Frequencies lower than 111 Hz are sent to the
subwoofer.
: Frequencies lower than 157 Hz are sent to the
subwoofer.
SUB.W LEVEL * 6
Subwoofer level
SUB.W 00 —
SUB.W 08
[ SUB.W 04 ] : Adjust the subwoofer output level.
* 3 If you are using a two-speaker system, set the fader level to “00.”
* 4 This adjustment will not affect the subwoofer output.
* 5 Displayed only when <AUX IN> is set to <AUX ON>.
* 6 Displayed only when <L/O MODE> is set to <SUB.W>.
EN10-17_KD-R416_001A_4.indd 14 EN10-17_KD-R416_001A_4.indd 14 10/12/09 2:24:57 PM 10/12/09 2:24:57 PM