Jenn-Air W10379136A - Manual (Page 9)

9
Product Dimensions
IMPORTANT:
■ The depth from the front face of the doors to the back of the
refrigerator cabinet is 24" (60.96 cm) without panels.
■ The power cord is 84" (213 cm) long.
■ The water supply connection is made at the bottom front of
the refrigerator.
Top View
Front View
■ Width dimensions were measured from hinge to hinge.
■ When leveling legs are fully extended to 1 ¹⁄₄" (3.2 cm) below
rollers, add 1 ¹⁄₄" (3.2 cm) to the height dimensions.
Tipping Radius
Be sure there is adequate ceiling height to stand the refrigerator
upright when it is moved into place.
■ The dolly wheel height must be added to the tipping radius
when a dolly is used.
Side Tipping Radius
The side tipping radius varies depending upon the width of the
model. Use the chart provided to determine the side tipping
radius.
NOTE: Tip on side only.
Door Swing Dimensions
The location must permit both doors to open to a minimum of
90°. Allow 4
¹⁄₂" (11.4 cm) minimum space between the side of the
refrigerator and a corner wall.
NOTE: More clearance may be required if you are using wood
overlay panels, custom handles, or extended handles.
Model A
42 41 ³⁄₄" (106 cm)
48 47
³⁄₄" (121.3 cm)
Model Width A (hinge edge to hinge edge)
42 41 ³⁄₄" (106 cm)
48 47 ³⁄₄" (121.3 cm)
A
24"
(61.0 cm)
*83 ³⁄₈ "
(211.8 cm)
A
(see chart following)
Model Tipping Radius A
42
48 91
³⁄₈" (232.1 cm)
94 ³⁄₈" (239.7 cm)
Model A B C D
42 40 ³⁄₄"
(103.5 cm)
39 ³⁄₄"
(101.0 cm)
45³⁄₈"
(115.3 cm) 46 ³⁄₄"
(118.8 cm)
48 43 ¹⁄₄"
(109.9 cm)
42"
(106.7 cm) 48⁵⁄₈"
(123.5 cm) 50 ¹⁄₄"
(127.6 cm)
A
90˚
110˚
110˚
90˚
B A C D