Jonsered FC 2255 - Manual (Page 3)

CONTENTS
English – 3
Contents Note the f ollowing before
starting:
Please read the oper ator’s manual carefully.
Maintenance, replacement, or repair of the emission
control devices and system may be performed by any
nonroad engine repair establishment or individual.
This label certify that the product has been certified in
accordance with American exhaust requirements EPA 1.
KEY TO SYMBOLS
Symbols 2
CONTENTS
Contents 3
Note the f ollowing before starting: 3
INTR ODUCTION
Dear customer! 4
WHA T IS WHAT?
What is what on the clear ing saw? 5
What is what on the clearing saw? 6
GENERAL SAFETY PRECA UTIONS
Impor tant 7
Personal protective equipment 7
Machine
′
s safety equipment 8
Cutting equipment 11
ASSEMBL Y
Assemb ling the handlebar and throttle 14
Transport position, handlebar 14
Assembling the cutting equipment 15
Fitting the blade guard/combination guard, grass
blade and ball-bearing-mounted support cup
15
Fitting the blade guard and saw blade 16
Fitting other guards and cutting attachments 16
Adjusting the harness and clearing saw 17
Vector harness 17
FUEL HANDLING
Fuel saf ety 19
Fuel 19
Fueling 20
ST ARTING AND STOPPING
Chec k before starting 21
Starting and stopping 21
W ORKING TECHNIQUES
Gener al working instructions 23
MAINTENANCE
Carb uretor 28
Muffler 30
Cooling system 30
Air filter 30
Bevel gear 31
Drive shaft 31
Spark plug 31
Winter use 32
Maintenance schedule 33
TECHNICAL D ATA
T echnical data 34
FEDERAL EMISSION CONTR OL WARRANTY
STATEMENT
Y OUR WARRANTY RIGHTS AND OBLIGATIONS 36
!
W ARNING! Long-term exposure to noise
can result in permanent hearing
impairment. So always use approved
hearing protection.
!
W ARNING! Under no circumstances may
the design of the machine be modified
without the permission of the
manufacturer. Always use genuine
accessories. Non-authorized
modifications and/or accessories can
result in serious personal injury or the
death of the operator or others.
Your warranty may not cover damage or
liability caused by the use of non-
authorized accessories or replacement
parts.
!
W ARNING! A clearing saw, brushcutter
or trimmer can be dangerous if used
incorrectly or carelessly, and can cause
serious or fatal injury to the operator or
others. It is extremely important that you
read and understand the contents of this
operator’s manual.
IMPORTANT ENGINE INFORMATION TWC
JONSERED HUSKVARNA SWEDEN
REFER TO OPERATOR`S MANUAL FOR
MAINTENANCE SPECIFICATIONS AND ADJUSTMENTS.
FOR SMALL NON - ROAD ENGINES.
EP THIS ENGINE CONFORMS TO U.S. PH1 A
The engine exhaust from this product
contains chemical known to the State
of California to cause cancer, birth
defects or other reproductive harm.