JVC GM-H40L1G - Manual (Page 10)

10
Connecting external speakers
You can connect commercial speakers of the following specifi cations to the EXT. SPEAKER terminal:
• Impedance: Between 6 Ω and 8 Ω
• Power handling capacity: More than 3 W
Speakers
(commercially available)
Ferrite core (supplied)
To reduce interference from the monitor on external
equipment, attach the supplied ferrite cores near to the
EXT. SPEAKER terminals on the rear panel of the monitor.
CAUTION
• Do not short-circuit 9 and ( speaker cords to each other. (Refer also to the instructions supplied with the speakers.)
NOTE
• When using the external speakers, set “SPEAKER SELECT” on the main menu to “EXT. (external)” (see page 21).
Speakers
(commercially available)
Installation
(cont.)
05-39_GM-H40L1G-f.indd 10 05-39_GM-H40L1G-f.indd 10 05.10.6 1:13:23 PM 05.10.6 1:13:23 PM