Jensen VR182 - Manual (Page 12)

VR182
12
IPOD OPERATION
If AUTO IPOD “ON” is selected in the system menu, your iPod will play automatically when
connected to the unit. “IPOD” will appear in the upper left corner of the display.
If AUTO IPOD “OFF” is selected in the system menu, your iPod will not play automatically
when connected. In this case, press the MODE button (4) to change to IPOD mode.
If you press the BAND, WB or MODE button during iPod playback, the iPod will resume
playback when you return to IPOD mode.
Selecting a Playlist
1. When an iPod is playing, press the ENTER button (22) to display the playlists on the LCD.
2. Rotate the TUNE ADJUST UP/DN button (22) to change the playlist between Artist /
Album /Genre /Song / Composer.
3. Press ENTER to confirm the selected playlist.
Press the EXIT (AS/PS) button (15) to exit or back out of the current menu.
Controlling Playback
Pausing Playback
During playback, press the >/|| button (26) to pause the iPod player. “Pause” will appear on the
LCD. Press >/|| again to resume playback.
Repeat Play
During playback, press the RPT button (5) to repeat the current song. “Repeat” will appear on
the LCD. Press RPT again to stop repeat playback.
Random Play
During playback, press the SHUF button (7) to play all songs in the current category in random
order. Random play will begin once the current song has finished playing. “Shuffle” will appear
on the LCD. Press SHUF again to stop random playback.
Selecting Tracks
During playback, press the SEEK < / > button (20/19) to play the previous or next track in the
current category. Press the SEEK < button (20) once to play the song from the start position or
press SEEK < twice to play the previous track.
Press and hold the SEEK < / > button (20/19) to fast reverse/forward the song. iPod playback
will continue when the button is released.