JVC GET0321-001A - Manual (Page 16)

16
ENGLISH
2
Indication pattern changes
as you adjust the level.
Ex.: When “TRE” is selected
Indication Range
BAS* 1 (bass)
Adjust the bass.
–06 (min.) to
+06 (max.)
TRE* 1 (treble)
Adjust the treble.
–06 (min.) to
+06 (max.)
FAD* 2 (fader)
Adjust the front and rear
speaker balance.
R06 (Rear only)
to
F06 (Front only)
BAL (balance)
Adjust the left and right
speaker balance. L06 (Left only)
to
R06 (Right only)
LOUD* 1 (loudness)
Boost low and high
frequencies to produce a
well-balanced sound at low
volume level.
LOUD ON
LOUD OFF
VOL* 3 (volume)
Adjust the volume.
00 (min.) to
30 or 50 (max.)*
4
* 1 When you adjust the bass, treble, or
loudness, the adjustment you have made is
stored for the currently selected sound mode
(C-EQ) including “USER.”
* 2 If you are using a two-speaker system, set
the fader level to “00.”
* 3 Normally the control dial works as the
volume control. So you do not have to select
“VOL” to adjust the volume level.
* 4 Depending on the amplifier gain control
setting. (See page 18 for details.)
You can select a preset sound mode suitable to
the music genre.
~
Indication
Preset values
BAS
(bass)
TRE
(treble)
LOUD
(loudness)
USER
(Flat sound) 00 00 OFF
ROCK
Rock or disco music +03 +01 ON
CLASSIC
Classical music +01 –02 OFF
POPS
Light music +04 +01 OFF
HIP HOP
Funk or rap music +02 00 ON
JAZZ
Jazz music +02 +03 OFF
Adjusting the sound
You can adjust the sound characteristics to your
preference.
1
Sound adjustments
Selecting preset sound modes
(C-EQ: custom equalizer)
EN12-17_KD-S32[J]f.indd 16 EN12-17_KD-S32[J]f.indd 16 7/11/05 2:19:14 PM 7/11/05 2:19:14 PM