JVC AV 36980 - Manual (Page 38)

3 8 C L O C K / T I M E R S
SET LOCK CODE
The Lock Code locks and unlocks
Channel Guard. Write this three digit
number down and keep it where
would-be viewers will not look for it!
To SET LOCK CODE
To operate
The padlock icon appears
Zero (the access code is zero )
To choose the first number
To move to the second place
To choose the second number
To move to the third place
To choose the third number
To FINISH
To save settings and exit
Note: If you forget the Lock Code
you can set another one this same
way.
Note: After a power inter ruption you
must reset the lock code.
LOCK CODE 0 0 0
F I N IS H
ON/OFF TIMER
YOU tell the TV to turn on and off.
Use it as an alarm to wake up, as a
program reminder, or to simulate that
you’re home when you’re out of the
house.
To ON/OFF TIMER
To operate
To set the hour (AM/PM) you
want the TV to turn on
To move to minutes
To set the minutes
To accept ON TIME and to move
to OFF TIME (set time again)
To move to CHANNEL
To select channel
To move to MODE
Choose ONCE or EVERYDAY
To YES NO
Choose YES for on, NO for off
To FINISH
To save settings
Note: A Timer Preview window will
appear in the PIP, lower right corner
of your screen, 7 seconds before the
Timer changes the current channel to
the timed program channel.
Note: In order for ON/OFF Timer to
work, the clock must be set. After a
power interruption, and before TV
Guide Plus+ data is received, the
clock will be cancelled.
Note: ON/OFF Timer cannot be set
to locked or guarded channels.
ON TI M E 12 : 00 AM
OFF TI M E 12 : 00 AM
C H A N N E L 0 7
MO D E ONCE EVERYDAY
ON/OFF TIMER YES NO
F I N IS H