John Lewis U33046 JLTDC10 - Manual (Page 14)

Delay start
With the Delay start button, you can
delay the start of a programme by
between 30 minutes (30') and a
maximum of 20 hours (20h).
1. Select the programme and additional
functions.
2. Press the Delay start button as many times
as necessary until the required Delay
start appears on the display, e.g. 12h if the
programme is to be started in 12 hours.
If the display is showing 20h and you
press the button again, the time delay
will be cancelled. The display will show
0'and then the duration of the selected
programme.
3. To activate the delay timer, press the
Start/Pause button. The amount of time
remaining until the programme is set to
start is continuously displayed (e.g. 15h,
14h, 13h, … 30' etc).
Setting child lock
The child lock can be set to prevent a
programme being accidentally started or a
programme in operation being accidentally
changed. The child lock function locks all
buttons and the programme selector. The
child lock can be activated or deactivated by
holding down the Extra delicate and Intensive
buttons simultaneously for 5 seconds.
– Before programme is started:
Appliance cannot be used
– After programme is started:
Programme in operation cannot be
changed
The icon appears in the display to indicate
that the child safety device is activated.
The child safety device is not deactivated once
the programme comes to an end.
If you want to set a new programme, you must
first deactivate the child safety device.
Starting the programme
Press the Start/Pause button. The
programme starts.
The programme progress is shown by
elapsing Dry time on LCD.
Changing programme
To change a programme which has been
selected by mistake once the programme has
started, first turn the programme selector to
Off and then reset the programme.
14