Specifications – JBL gto601.1 II User Manual
Page 8
GTO301.1
II
• 204W RMS x 1 channel at 4 ohms and
≤
1% THD + N
• Signal-to-noise ratio: 77dBA (reference 1W into 4 ohms)
• 294W RMS x 1 channel at 2 ohms, 14.4V supply and
≤
1% THD + N
• Dynamic power: 320W at 2 ohms
• Effective damping factor: 6.39 at 4 ohms
• Frequency response: 10Hz – 302Hz (–3dB)
• Maximum input signal: 4.7V
• Maximum sensitivity: 75mV
• Output regulation: .098dB at 4 ohms
• Dimensions (L x W x H): 11-5/8" x 12-5/16" x 2-3/8"
• Fuse rating: 1 x 30A
GTO601.1
II
• 424W RMS x 1 channel at 4 ohms and
≤
1% THD + N
• Signal-to-noise ratio: 72dBA (reference 1W into 4 ohms)
• 580W RMS x 1 channel at 2 ohms, 14.4V supply and
≤
1% THD + N
• Dynamic power: 778W at 2 ohms
• Effective damping factor: 6.326 at 4 ohms
• Frequency response: 10Hz – 302Hz (–3dB)
• Maximum input signal: 5.3V
• Maximum sensitivity: 75mV
• Output regulation: .21dB at 4 ohms
• Dimensions (L x W x H): 15-1/8" x 12-5/16" x 2-3/8"
• Fuse rating: 2 x 30A
GTO1201.1
II
• 787W RMS x 1 channel at 4 ohms and
≤
1% THD + N
• Signal-to-noise ratio: 70dBA (reference 1W into 4 ohms)
• 1114W RMS x 1 channel at 2 ohms, 14.4V supply and
≤
1% THD + N
• Dynamic power: 1339W at 2 ohms
• Effective damping factor: 6.348 at 4 ohms
• Frequency response: 10Hz – 302Hz (–3dB)
• Maximum input signal: 6.1V
• Maximum sensitivity: 75mV
• Output regulation: .14dB at 4 ohms
• Dimensions (L x W x H): 18-11/16" x 12-5/16" x 2-3/8"
• Fuse rating: 3 x 40A
GTO75.2
II
• 97W RMS x 2 channels at 4 ohms and
≤
1% THD + N
• Signal-to-noise ratio: 82dBA (reference 1W into 4 ohms)
• 145W RMS x 2 channels at 2 ohms, 14.4V supply and
≤
1% THD + N
• 290W RMS x 1 channel at 4 ohms, 14.4V supply and
≤
1% THD + N
• Dynamic power: 190W at 2 ohms
• Effective damping factor: 6.39 at 4 ohms
• Frequency response: 10Hz – 90kHz (–3dB)
• Maximum input signal: 5.5V
• Maximum sensitivity: 75mV
• Output regulation: .098dB at 4 ohms
• Dimensions (L x W x H): 11-5/8" x 12-5/16" x 2-3/8"
• Fuse rating: 1 x 30A
GTO75.4
II
• 104W RMS x 4 channels at 4 ohms and
≤
1% THD + N
• Signal-to-noise ratio: 80dBA (reference 1W into 4 ohms)
• 142W RMS x 4 channels at 2 ohms, 14.4V supply and
≤
1% THD + N
• 284W RMS x 2 channels at 4 ohms, 14.4V supply and
≤
1% THD + N
• Dynamic power: 163W at 2 ohms
• Effective damping factor: 6.384 at 4 ohms
• Frequency response: 10Hz – 83kHz (–3dB)
• Maximum input signal: 5.8V
• Maximum sensitivity: 75mV
• Output regulation: .069dB at 4 ohms
• Dimensions (L x W x H): 15-1/8" x 12-5/16" x 2-3/8"
• Fuse rating: 2 x 30A
GTO755.6
II
• 60W x 4 channels and 107W x 2 channels, at 4 ohms and
≤
1% THD + N
• Signal-to-noise ratio: 79dBA (reference 1W into 4 ohms)
• 80W x 4 channels, 150W x 2 channels at 2 ohms, 14.4V
supply and
≤
1% THD + N
• 160W x 2 channels, 300W x 1 channel at 4 ohms, 14.4V
supply and
≤
1% THD + N
• Dynamic power: 117W (channels 1, 2, 3, 4);
163W (channels 5, 6) into 2 ohms
• Effective damping factor: 6.392 at 4 ohms
• Frequency response: 10Hz – 47kHz (channels 1, 2, 3, 4);
10Hz – 302Hz (channels 5, 6)
• Maximum input signal: 6V
• Maximum sensitivity: 75mV
• Output regulation: .042dB at 4 ohms
• Dimensions (L x W x H): 18-11/16" x 12-5/16" x 2-3/8"
• Fuse rating: 2 x 30A
SPECIFICATIONS
Declaration of Conformity
We, Harman Consumer Group International
2, route de Tours
72500 Chateau-du-Loir
France
declare in own responsibility that the product
described in this owner’s manual is in compliance
with technical standards:
EN 55013:2001
EN 55020:2002
Klaus Lebherz
Harman Consumer
Group International
Chateau-du-Loir, France 12/04
JBL Consumer Products
250 Crossways Park Drive, Woodbury, NY 11797 USA
© 2004 Harman International Industries, Incorporated
JBL and Grand Touring are registered trademarks
of Harman International Industries, Incorporated.
Part No. GTOAMPOM12/04
www.jbl.com
Specifications and appearance are
subject to change without notice.