JVC TM-A140PN-A - Manual (Page 7)

ENGLISH
7
EXIT
PHASE CHROMA BRIGHT CONTRAST MENU VOLUME/SELECT
– +
PHASE CHROMA
MENU
DISPLAY AND SELECTION IN THE <MENU> SCREEN
MODE (SETTING)
< MENU >
‰ SHARPNESS : 00
COLOR SYSTEM : AUTO
Menu items Purpose Setting range
SHARPNESS Picture sharpness
COLOR
Colour system
SYSTEM
00 +1 +2 +3 +4 +5
Front panel Function
Contents
button displayed
+ Increase (to max. value)
3
Advance the setting value
– Decrease (to min. value)
2
Reverse the setting value
VOLUME/
SELECT (–)
VOLUME/
SELECT (+)
Front panel Function
Contents
button displayed
PHASE ( ) ▼ Advance selection mark (
3
)
CHROMA ( ) 5 Reverse selection mark ( 2 )
Front panel Function
Contents
button displayed
MENU EXIT
Quit (or Release) the <MENU>
screen
1
2 3
• SHARPNESS • COLOR SYSTEM
You can set the following menu items.
Set them depending on your needs.
1. Press the MENU button.
The <MENU> screen is displayed.
2. Press the PHASE ( ) or CHROMA ( ) button
to select MENU items.
A selection mark ( 3 ) is put next to the selected item.
3. Press the VOLUME/SELECT buttons to set.
* Normally set the COLOR SYSTEM to the AUTO mode. If reception in the AUTO mode is not good,
set it to the exclusive mode (NTSC or PAL) corresponding to the received colour system.
4. If you want to set the other menu items, repeat
procedures 2 and 3.
5. Press the MENU button to quit.
1 Selection mark ( 3 3 3 3 3 ): Indicates the
menu item you select.
2
Menu item: Menu items you can
select.
3 Setting display: Indicates the
current settings (value).
4
Function display: The functions of
the front panel buttons (7 buttons on
the left.) correspond to the function
displayed.
<MENU> screen
<Front panel button>
Function
Contents
displayed
▼ Advance the menu item.
5 Reverse the menu item.
– Lower the adjustment
value. (to the minimum)
+ Raise the adjustment
value. (to the maximum)
3 Advance the setting value.
2 Reverse the setting value.
EXIT Exits the <MENU> screen.
AUTO NTSC PAL
4
SHARPNESS
COLOR SYSTEM
HOW TO USE THE MENU FUNCTIONS
VOLUME/SELECT
– +
MENU