Jet Tools 707000 - Manual

Features
PORTABLE
■ • Combination benchtop jointer & planer provides a 2 in 1 machine to maximize workspace
■ • Compact benchtop design fits conveniently in smallshop environments
■ • Integrated cord wrap makes transporting easy and ensures workshop safety
POWERFUL
■ • Heavy-Duty 13 Amp motor for various cutting applications
■ • Two high speed steel knives for precise, smooth cuts
■ • Oversized, ergonomic knobs provide ease of use andmaximum control
PRECISE
■ • Large aluminum extruded fence makes joining stable and precise
■ • Sheet metal outfeed table with height adjustment supports long workpieces and helps
reduce snipe
■ • Planing and joining tables lock to ensure precision cutting
■ • Precision machined table top ensures a smooth, straight cut
Large aluminum extruded fence a.
Sheet metal outfeed table with b.
height adjustment
Planing and joining tables lock c.
Precision ground table top d.
Oversized, ergonomic knobs e.
Integrated cord wrap f.
C F B
SpecificationS
Stock number 707400
Model number JJP-8BT
Motor 120V, 60Hz, 13Amp
Knife Size (in.) 8.25 x .65 x .06
number of Knives (RpM) 2
cutting Speed 9,000
cuts per Minute cpM 18,000
feed Speed fpM 19.5
Max. cutting Width (in.) 8
Jointer Max. cut Depth (in.) 1/8
planer Max. cut Depth (in.) .08
cutting thickness (in.) .20 - 4.92
Jointer table Size (LxW/in.) 29 x 8-1/4
planer table Size (LxW/in.) 10-5/8 x 8-1/2
planer table with out feed (LxW/in.) 17-3/4 x 8-1/2
fence Size (LxW/in.) 4-1/8 x 21
fence tilt (deg.) 0-45
Gross Wt. / net Wt. (lbs.) 68.3 / 58.4
jettools.com/b3nch
HEAVY-DUTY B3NCH ™
10" JOBSITE TABLE SAW
if you're looking for a jobsite saw that's both powerful and portable, look
no further than the all-new Jet ® B3ncH 10" Jobsite table Saw w/stand.
this table saw features a 15 aMp soft start motor, 25" right rip capacity,
a riving knife and anti-kickback pawls for added safety, and a heavy-duty
folding stand with wheels for quick setup and portability. Weighing in at
just under 100lbs, this powerhouse brings the stability of a stationary
table saw to your jobsite, then rolls away when you're done.
THE WOODWORKERS
•
CHOICE FOR
PRECISION
TOOLS
Features
PORTABLE
■ • Easy folding stand for convenient storage, quick setup and portability on the jobsite
■ • Rubber hand grips on each end of the table allow you to conveniently carry without stand
■ • Unique base design allows for adequate tool storage on the jobsite
POWERFUL
■ • Heavy-Duty 15 Amp motor with soft start
■ • Large telescoping extension wing provides a wide 25" ripping capacity
■ • Unique dust shroud design enhances dust and chip removal
PRECISE
■ • Aluminum extruded rails ensure a square fence and sliding precision
■ • Rear extension provides outfeed support and keeps the workpiece flat
■ • New riving knife system complies with UL standards and prevents kickback
■ • Convenient push button arbor lock allows for easy and quick blade change
■ • Quick-lock fence slides smoothly and locks securely for accurate cuts
SpecificationS
Stock Number 707000
Model Number JBTS-10MJS
Motor 15 A, 120 V, 60 Hz
Ripping Capacity (in.) 25 right
Blade Speed (RPM) 4,000
Table Dimensions (LxW/in.) 24 x 21-25/32
Table Dimensions with Extension (LxW/in.) 30-1/4 x 21-25/32
Max. Cut Depth @ 90° (in.) 3-1/8
Max. Cut Depth @ 45° (in.) 2-1/2
Arbor Diameter (in.) 5/8
Blade Type (in.) 10– 40T carbide tipped
Dust Port Diameter (in.) 2-1/2
Net Wt. / Gross Wt. (lbs.) 90.39 / 104.72
Easy folding stand a.
Large telescoping extension wing b.
Aluminum extruded rails c.
Quick-lock fence d.
Rear extension e.
New riving knife system f.
A B
C
E
F
D