GE 98566 GE Wireless 2.4 GHz Mini Mouse - Manual (Page 3)

How to Remove the Nano Receiver
Step 1: Push the Nano inward and release your finger,
the spring will release the receiver out of the mouse
Step 2: Take the now protruding Nano out of the storage
area.
Setup the Connection between the Receiver and the Mouse
1. Plug the Nano receiver into the USB port of your
computer.
2. Insert the batteries into the mouse, then follow the
steps below.
3. If the mouse is not working, please put it into pair mode.
4. Pairing: Re-plug the receiver into the USB port of your
computer, then press the connect buttons on the mouse.
If the mouse does not work after 10 seconds, pair them
again. (The receiver has auto pairing function).