Pg. 39 – JVC GR-D74U User Manual
Page 39
ADDITIONAL INFORMATION
EN
39
MasterPage: Ref_Right
● Clean the video heads using an optional dry cleaning
cassette when:
• No picture during playback.
• Blocks of noise appear during playback.
For details,
● If Stop mode continues for 5 minutes when power is
supplied from a battery, the camcorder shuts off
automatically. To turn on again, set the Power Switch to
“OFF”, then to “PLAY”.
● You can also view the playback picture on the LCD monitor
with it flipped over and pushed against the camcorder body.
● LCD monitor/viewfinder indications:
• When power is supplied from a battery: the “
”
battery indicator is displayed. (
• When power is supplied from an AC outlet: the “
”
battery indicator does not appear.
● When a cable is connected to the AV connector, the sound
is not heard from the speaker.
● Even if “DIS” is set to “ON” (੬ pg. 26), the Stabilizer will be
disabled.
● If Program AE with special effects (੬ pg. 30) is engaged,
certain modes of Program AE with special effects are
disabled during Snapshot recording. In such a case, the
icon blinks.
● If shooting is not performed for approx. 5 minutes when the
Power Switch is set to “A” or “M” and power is supplied
from the battery pack, the camcorder shuts off
automatically to save power. To perform shooting again,
push back and pull out the viewfinder again or close and re-
open the LCD monitor.
● The Motor Drive mode (੬ pg. 31) is disabled when the
VIDEO/MEMORY Switch is set to “MEMORY”.
● When a cable is connected to the AV connector, the shutter
sound is not heard from the speaker.
● Still images taken are compliant to DCF (Design rule for
Camera File system). They do not have any compatibility
with devices which are not compliant to DCF.
GR-D94US.book Page 39 Monday, November 17, 2003 2:12 PM