Jabra PRO 930 - Manual (Page 22)

22
english
Jabra PrO 930
Battery charge time:
20% charge in less than 20 minutes.
50% charge in less than 45 minutes.
Full charge in less than 3 hours.
Battery shelf life:
headset battery holds charge for at least 6 months in the off state, before recharge is required.
9.3 mATERIALS AND ALLERGIES
the headband attachment is made of stainless steel and does not have a nickel-coated surface. nickel release
from the headband is 0.02 μg/cm²/week, which is below the 0.50 μg/cm²/week limit established by eU Directive
94/27/eF. the stainless steel alloy was tested for nickel release in accordance with the european standard en
1811:1998.
Other wearing-style attachments are made of plastic and contain no known allergens. the ear cushions do not
contain vinyl. the products contain no nickel, chrome or natural rubber that can come into contact with users’
skin.
9.4 JABRA PRO 930 BASE
the Jabra PrO 930 base meets the following specifications.
Dimensions:
118 mm x 76 mm x 29 mm.
Wireless standard:
(Cat - iq) european DeCt and U.s. DeCt.
Operating environment:
0˚C to +40˚C; Up to 95% rh non-condensing.
Recharge cradle:
Fits supplied Jabra PrO 900 series headset.
Audio:
built-in speaker provides ring tones and/or audio feedback for keypad operation.
PC connector:
Mini Usb.
Firmware update:
Downloadable from web, or via Jabra PC suite.
PC-based configuration:
all settings can be stored and loaded from a PC for backup and mass deployment.
Softphone support:
Full call handling for skype, Microsoft Office Communicator and Cisco IP Communicator; for other softphones see
headset as a standard sound card; support for additional softphones may be added via driver updates for the PC.
For the latest updates, see jabra.com/pcsuite on the web.
9.5 PRODUCT DISPOSAL
Please dispose of the headset according to local regulations and recycle when possible. Do not dispose as
household waste. Do not dispose of the headset in a fire as the battery may explode. batteries may also explode
if damaged.