JVC CA-EX70 - Manual (Page 40)

40
CA-EX70
STANDBY
XM-EX90 MINIDISC RECORDER
DISC LOADING MECHANISM INPUT
CD REC
REC LEVEL
REC PAUSE
/CANCEL
SAMPLING RATE CONVERTER
STANDBY
TD-EX90 CASSETTE DECK
CD REC
REVERSE MODE DOLBY NR REC DOLBY B C
REC PAUSE
POWER POWER PLAY MODE REPEAT STANDBY
XL-EX70 COMPACT DISC PLAYER
CD 3
CD 2
CD 1
/CANCEL
PLAY & EXCHANGE
BAND
VOLUME
UP
KEY MODE
DOWN
INPUT
PHONES
RX-EX70 INTEGRATED AMPLIFIER / TUNER
STANDBY
DIRECT S. A. BASS
POWER POWER
COMPU LINK
Linked Operation of the Other Optional Components (Compu Link)
The EX series components can be controlled under linked operation provided by the JVC’s Compu
Link remote control system.
What is Compu Link
The world of single components, in which you purchase a cassette deck, CD player, amplifier and
other components separately and enjoy your own composition, is an effective means for pursuit of
high-quality reproduction. However, in terms of operability, the need of controlling components
independently makes their control complicated and their linked operation impossible. Then, isn’t it
possible to combine single components and control them as simply as an integrated audio system?
The Compu Link remote control system is the response to such a requirement.
The components in the JVC EX series are equipped with jacks named COMPU LINK-3 (COMPU LINK
jacks). By connecting the COMPU LINK jacks of these components, they can be controlled simply
with a systematized, linked operation.
Compu Link connections
Using Compu Link cables, connect the COMPU LINK jacks of EX series components. Connect so that
the Compu Link cables can bridge all of the EX series components you have as shown below. The
components can be connected in any order.
Compu Link-3 features
The Compu Link-3 system of the EX series components makes the following operations possible.
Shortcut playback
Simply selecting an input source of the amplifier/tuner starts playback of the selected source
component (CD player, MD recorder or cassette deck).
Also, even if you do not touch the amplifier/tuner, starting playback of a source component sets the
amplifier’s input source automatically to the played component.
(See “Shortcut Playback” on page 41.)
A single remote control unit
The remote control unit provided with the units can also be used to control other EX series
components.
(See “Remote Control of the Other Optional Components” on page 43.)
Synchronized recording
Recording can be started automatically in synchronism with the start of playback of a source
component.
(See “Synchronized Recording” on page 45.)
Timer operation
The timer function built into the amplifier/tuner can be used to start recording or playback of other
components at the reserved time of the day or switch the power to the STANDBY mode in the
reserved time period.
Compu Link cables
Amplifier/tuner
RX-EX70
CD player
XL-EX70
MD recorder Cassette deck
EN40-52.CA-EX70[J]/1-5/21 98.6.9, 9:30 AM 40