JVC SA-DV6000 - Manual (Page 41)

66
Screen displa
y
<Operation related> NO CF CARD! (Flashing for 3 sec.) PROTECT! (Flashing for 3 sec.) NO CLIP! (Flashing for 3 sec.) SET
WLAN
AD HOC MODE
OFF! (Flashing for 3 sec.) SET DHCP OFF! (Flashing for 3 sec.) OVERLAP
HTTP!
(Flashing for 3 sec.) OVERLAP
ASF_HTTP!
(Flashing for 3 sec.) OVERLAP
ASF-R
TSP!
(Flashing for 3 sec) OVERLAP
QT
-R
TSP!
(Flashing for 3 sec) ILLEGAL SETTING! (Flashing for 3 sec.) DA
T
A
LENGTH 10 or 26
(Flashing for 3 sec) CHRACTER IS SHOR
T!!
(Flashing for 3 sec) SET LEAP MODE OFF!! (Flashing for 3 sec) SAME OLD P
ASSWORD!!
(Flashing for 3 sec) GARBAGE! (Flashing display while optimizing) IP
ADDRESS
ERROR!
(Flashing display until network connection is established) NO UPDA
TE FILES!
(Flashing for 3 sec.) NO UPDA
TE CARD!
(Flashing for 3 sec.) UPDA
TE F
AILED!
COPY
GUARD!
Other
s
Tr
oub
leshooting
Cause
There is no CF memory card inserted. Deletion of a protected clip file was attempted. There is no CF memory card inserted, of there is no clip file available. Use of DHCP
server was attempted
while in the
AD HOC mode.
Selection of
AD HOC mode was at-
tempted while using DHCP
server
.
Port set for HTTP
for WEB Browser is
already in use. Port set for HTTP
for Media Player is
already in use. Set port for R
TSP
for Streamproducer is
already in use by another port. Set port for R
TSP
for Quick time is
already in use by another port. Set value exceeded setting range. Setting made with other than 10 or 26 characters. Set number of characters is 2 or less / 3 or less. Attempted to use LEAP while in the ADHOC mode. The new password is the same as the old password. Optimization of internal ROM disk currently being processed. Failed to acquire IP
address when DHCP
is ON. There is no update data in the CF memory card. CF memory card is not inserted. Update was not successful. Signal of recording origin is protected with copy guard.
Remed
y
Insert a CF memory card. To
delete the clip file, remove the
protection. Check the CF memory card. Set DHCP
in the NETWORK SET
menu
screen to OFF when using the AD HOC mode. Set WLAN
AD MOC MODE in the
NETWORK SET
menu screen to OFF
when using DHCP
server
.
Set an unused port. Set an unused port. Set an unused port. Set an unused port. Set a value within the setting range. Set using 10 or 26 characters. Set using 3 or more / 4 or more charac- ters. Set LEAP to OFF when in the ADHOC mode. Set a password dif
ferent from the old
password. Please wait until process is completed. Set DHCP again. Insert a CF memory card with UPDA
TE
data into the slot. Insert a CF memory card with UPDA
TE
data into the slot. Contact your JVC dealer
.
Input recording signal with no copy guard protection.
Reference
page
4 42 –– 12 12
13, 52 13, 52 13, 52 13, 52
12 13 14 14 14 –– 12 64 64 64 ––
Memo
If the input signal is switched during transmission or CF recording, the video may flicker
. However
, the video will return to n
ormal
after a certain time. (The time will dif
fer depending on the selected encoding parameter
.)
67
Other
s
Chec
king comm
unication/connection
By using the PING command standard to W
indows, it is possible to check whether the connection is correct and that communication
can be made from the PC to SA-DV6000.
1.
Launch the command prompt. ●
For Windows 2000 From the Start button, select [Programs]
→
[Accessories]
→
[Command Prompt].
2.
Input the following and press the Enter key
.
PING xxx.xxx.xxx.xxx (xxx.xxx.xxx.xxx is the IP
address of the other party)
Input example: When the IP
address of the other party is "192.168.0.10"
PING 192.168.0.010
3.
Check to see that the other party is successfully displayed. If connection is not successful, “Request timed out” or “Destination host unreachable” message will appear
.