JVC XV-D705GD - Manual (Page 63)

61
Setting and adjustment
Setting the unit
Portugés
Chinese
XV-D705GD/XV-D703TN
LET0142-003A
[2U, 3U, 4U, US, UB, UT] EN
English
Español
5 Test tone (available only while setting LEVEL or DELAY)
You can check the level or delay setting by
monitoring the test tone.
1 Select [TEST TONE] using , then press
ENTER .
The color of "TEST TONE" changes.
2 Select the desired speaker(s) using .
• F.SP: front speakers
• C.SP: center speaker
• R.SP: rear speakers
After selecting the Test tone, if you do not move the cursor, the test tone is
output from each speaker one by one.
In Test tone mode, if you move
down from “R.SP” position, the test tone
continues to output from the rear speakers as long as is any position other
than “F.SP” and “C.SP”. Similarily, if you move up from “F.SP” position,
the test tone continues to output from the front speakers as long as is any
position other than “C.SP” and “R.SP”.
3 Set the level or delay using again, if necessary.
SPK.SETTING
EXPERT
LEVEL
DELAY
TEST TONE
F. SP 0db
C. SP 0db
R. SP 0db
0db S.WOOFER
PREFERENCE2 PREFERENCE1
PRESS KEY
BASS
In Test tone mode, you hear pink
noise, which includes all frequencies
in the audible range, from the
speakers. This is not a malfunction.
The test tone is not output from the
SUBWOOFER output.
NOTES
¶
To exit the test tone mode
Move
to [TEST TONE] in the on-screen display and press ENTER until
[TEST TONE] returns to its original color.