Connecting the fm antenna – JVC CA-MXK10R User Manual
Page 7
Advertising
4
Getting Started
CAUTION:
• Make all connections before plugging the System into an AC power outlet.
Connecting the FM Antenna
Using the Supplied Wire Antenna
Using the Coaxial Type Connector (Not supplied)
A 75-ohm antenna with coaxial type connector (IEC or DIN45 325) should be connected to the FM 75-ohm COAXIAL terminal.
If reception is poor, connect the outdoor antenna.
• Before attaching a 75 ohm coaxial lead (the kind with a round wire going to an outdoor antenna), disconnect the supplied
FM Wire Antenna.
FM wire antenna (supplied)
Coaxial cable
FM outdoor antenna
(Not supplied)
Body.fm Page 4 Monday, March 18, 2002 4:18 PM
Advertising