JVC KD-DV6102 - Manual (Page 39)

39
ENGLISH
General settings — PSM
Basic procedure
You can change PSM (Preferred Setting Mode)
items listed in the table that follows.
1
2
Select a PSM item.
Ex.: When you select “DIMMER”
3
Adjust the PSM item selected.
4
Repeat steps 2 and 3 to adjust the
other PSM items if necessary.
5
Finish the procedure.
Indications Selectable settings, [reference page]
DEMO
Display demonstration DEMO ON : [Initial]; Display demonstration will be activated
automatically if no operation is done for about
20 seconds, [11].
DEMO OFF : Cancels.
CLOCK H
Hour adjustment 0 – 23 (1 – 12), [11]
[Initial: 0 (0:00)]
CLOCK M
Minute adjustment 00 – 59, [11]
[Initial: 00 (0:00)]
24H/12H
24 hours or 12 hours time
display
12H
O 24H, [11]
[Initial: 24H]
CLK ADJ
Clock adjustment
AUTO : [Initial]; The built-in clock is automatically
adjusted using the CT (clock time) data in the
RDS signal.
OFF : Cancels.
To be continued....
EN32-39_KD-DV6101[E]3.indd 39 EN32-39_KD-DV6101[E]3.indd 39 12/13/04 1:50:03 PM 12/13/04 1:50:03 PM