JVC NX-PN7 - Manual (Page 23)

19
Setting the Timer
Using the Timer, you can wake up with music, etc.
• When using an iPod or other equipment as the playback source, connect it to the unit beforehand.
(P.12, P.17)
• You can set the Timer when the unit is turned on or on standby.
• The unit is turned off automatically 2 hours after it is turned on by the Timer.
1 Activate the timer setting mode.
“TIMER 1,” “TIMER 2,” or “TIMER 3” appears on the display.
2
Select the timer you want to set.
3
Select the timer type.
WEEKLY: See step 4 below.
ONCE: The timer works once on a selected day of the week.
4
Select the desired day of the week.
• When “WEEKLY” is selected in step
3:
SUN DAY to SAT DAY: The timer works every week on the selected day.
MON-FRI: The timer works from Monday to Friday every week.
MON-SAT: The timer works from Monday to Saturday every week.
EVERYDAY: The timer works everyday.
• When “ONCE” is selected in step 3:
TIMER 2 TIMER 1
TIMER 3
ONCE WEEKLY
MON-FRI
EVERYDAY
MON DAY SUN DAY TUE DAY WED DAY
THU DAY FRI DAY SAT DAY
Back to the beginning MON-SAT
TUE DAY MON DAY WED DAY
THU DAY SAT DAY FRI DAY Back to the beginning
SUN DAY
Continued on the next page
NX-PN7[J].BOOK Page 19 Friday, April 18, 2008 3:53 PM