Connections, Getting started, Before making any connections – JVC XV-M556TN User Manual

Page 15

Advertising
background image

Getting started

XV-M557GD/XV-M556TN (EN)
LVT0391-016A [UX, 3U, 4U, US, UT, UB]

12

Getting

star

ted

VIDEO

AUDIO

RIGHT

LEFT

IN

S-VIDEO

PCM/STREAM

OPTICAL

VIDEO

S-VIDEO

VIDEO OUT

Y

P

B

P

R

COMPONENT

AV COMPU LINK

DIGITAL OUT

ATTENUATOR

L

R

OFF

ON

NTSC

PAL

AUDIO OUT

VIDEO OUT

SELECT

Connections

*In the following description, "TV" may be substituted with "monitor" or "projector."
*Before using the unit, you have to connect the unit to a TV and/or amplifier.

Before making any connections

• Do not connect the AC power cord until all other connections have been made.
• Since different components often have different terminal names, carefully read the instructions supplied with the

component you are going to connect.

To connect to a TV

You can enjoy using the unit by simply connecting it to a TV. To improve audio sound quality, connect the audio
outputs to your separate audio equipment. (See the following pages.)

Getting started

Connect the unit to a TV equipped with stereo audio input and video input jacks using the supplied audio/video
cables.

• If your TV has a monaural audio input instead of stereo, you need to use an optional audio cable which converts

stereo audio output to monaural.

• If your TV has an S-video input, you should connect it with the S-VIDEO output of the unit using the supplied S-

video cable in addition to the (standard) video connection to get better picture quality.

• The ATTENUATOR switch should be normally set to OFF. If you hear distorted audio because the sensitivity of the

TV’s audio input is too high, set this switch to ON.

The unit is compatible with the PAL and NTSC color systems. Set the VIDEO OUT SELECT switch on the rear panel to
match the color system of your TV. Make sure that the color system of the DVD/Video CD/SVCD disc labeled on the
package matches your TV.
If you use a multi-system TV, you can play discs recorded on both PAL and NTSC systems.

• Connect VIDEO OUT of the unit directly to the video input of your TV. Connecting VIDEO OUT of the unit to a TV via a VCR may

cause a monitor problem when playing back a copy-protected disc.

Audio/video cable
(supplied)

S-video cable
(supplied)

The unit

TV

White

Red

Yellow

Red

White

Yellow

NOTE

* If the TV has an AV COMPU LINK terminal,

see “AV COMPU LINK remote control system”
on page 48.

EN12-16XV-M557GD/556TN[U]

99.11.2, 1:45 PM

12

Advertising
This manual is related to the following products: