Jonsered FC2145W - Manual (Page 3)

CONTENTS
English – 3
Contents Note the f ollowing before
starting:
Please read the oper ator’s manual carefully.
Long-term exposure to noise can result in permanent
hearing impairment. So always use approved hearing
protection.
KEY TO SYMBOLS
Symbols ................................................................ 2
CONTENTS
Contents ............................................................... 3
Note the following before starting: ........................ 3
INTR ODUCTION
Dear Customer , .................................................... 4
WHA T IS WHAT?
What is what on the clear ing saw? ....................... 5
What is what on the clearing saw? ....................... 6
What is what on the clearing saw? ....................... 7
GENERAL SAFETY PRECA UTIONS
Impor tant .............................................................. 8
Personal protective equipment ............................. 8
Machine
′
s safety equipment ................................. 9
Cutting equipment ................................................ 12
ASSEMBL Y
Assemb ling the handlebar and throttle ................. 15
Assembling the handlebar and throttle ................. 15
Transport position, handlebar ............................... 16
Assembling the cutting equipment ....................... 16
Fitting the blade guard/combination guard, grass
blade and ball-bearing-mounted support cup ....... 16
Fitting the blade guard and saw blade .................. 17
Fitting the trimmer guard and trimmer head Trimmy
SII ......................................................................... 18
Fitting other guards and cutting attachments ....... 18
Adjusting the harness and clearing saw ............... 19
Standard harness ................................................. 19
Vector harness ..................................................... 19
FUEL HANDLING
Fuel saf ety ............................................................ 21
Fuel ...................................................................... 21
Fuelling ................................................................. 22
ST ARTING AND STOPPING
Chec k before starting ........................................... 23
Starting and stopping ........................................... 23
W ORKING TECHNIQUES
Gener al working instructions ................................ 25
MAINTENANCE
Carb urettor ........................................................... 29
Muffler .................................................................. 31
Cooling system ..................................................... 31
Air filter ................................................................. 32
Bevel gear ............................................................ 32
Drive shaft ............................................................ 32
Spark plug ............................................................ 33
Winter use ............................................................ 33
Maintenance schedule ......................................... 34
TECHNICAL D ATA
T echnical data ...................................................... 35
EC-declaration of conformity ................................ 38
!
W ARNING! Under no circumstances may
the design of the machine be modified
without the permission of the
manufacturer. Always use genuine
accessories. Non-authorized
modifications and/or accessories can
result in serious personal injury or the
death of the operator or others.
!
W ARNING! A clearing saw, brushcutter
or trimmer can be dangerous if used
incorrectly or carelessly, and can cause
serious or fatal injury to the operator or
others. It is extremely important that you
read and understand the contents of this
operator’s manual.