General i/o – JVC 340 SC User Manual

Page 61

Advertising
background image

Chapter 2—Functional Description

Model 330, 340SC and 370SC Service Manual

2-49

IIC

O

VIDOK

Tells SCB that no VABs are reporting problems.

IIC

O

SWEEPOK

Tells SCB that all sweeps are operating.

IIC

O

BEAMDET

Tells SCB that beam current limiting is occurring.

BUS

I/O

Information

Description

Serial

I

REDBIAS

Commanded amplitude of red LCLV bias.

Serial

I

GRNBIAS

Commanded amplitude of green LCLV bias.

Serial

I

BLUBIAS

Commanded amplitude of blue LCLV bias.

Serial

I

RCONT

Commanded red contrast.

Serial

I

GCONT

Commanded green contrast.

Serial

I

BCONT

Commanded blue contrast.

Serial

I

BRIGHT

Commanded brightness level.

General I/O

This section provides a comprehensive description of the inputs to and outputs
from the VPB. The I/O description are arranged by the source/destination of the
signal and so the assemblies communicated with are used as the primary heading
of each group of signals and then are further subdivided into inputs and outputs. In
each case, the signal's direction is noted, with input referring to an input to the
RTG, and output to an output from the VPB. (e.g.: under Raster Timing Generator
'Input'; VSYNC refers to the signal VSYNC that is an input to the VPB from the
Raster Timing Generator). When test points are provided for the I/O they are
noted.

Table 2-11. Video Processor Board I/O Signals

System Controller Board

Input

Description

IICCLK

IIC clock line. Unidirectional clock line for control of

synchronous data transfer over IIC data bus.

BONSCRN

Along with RONSCRN, GONSCRN, VONSCRN,

VIDBLANK, and DCRSTR (the later two on from the
RTG board) determines whether there is full brightness,
black, gray-scale, or external video presented in blue at a
given point on the screen.

RONSCRN

Similar to BONSCRN.

GONSCRN

Similar to BONSCRN.

VONSCRN

Determines if internal test patterns will be shown.

VIDTEST

Internal gray-scale video input information. Real time data 0V

to 1V.

RSENS

Sensitivity (Z-axis gain) correction information for red. Real

time data at 0V to 1V.

GSENS

Similar to RSENS.

BSENS

Similar to RSENS.

Advertising
This manual is related to the following products: