GE RM24918 - Manual (Page 10)

10
Using Your Remote
Code Identification
The Code Identification Feature allows you to
identify the 4 digit library code stored under your
device key. For example, if you want to find out
what 4 digit code is stored under your TV device
key, follow the six steps below:
1. Press and hold the CODE SEARCH
button until the red indicator stays on.
Release the CODE SEARCH button.
2. Press and release the desired mode
button ( TV, VCR, etc.). The red
indicator blinks, then stays lit.
3. Press and release the CODE
SEARCH button. The red indicator
blinks once and remains lit.
4. To find the first digit
for the code stored
under the mode key
pressed in step 2,
press each numeric
key from 0-9 in turn.
The number that
causes the indicator
light to blink is the first
digit in your code.
5. To find the second digit, repeat step 4, this
time when the red indicator blinks off this is the
second digit.
6. Repeat step 4 to find the third and fourth digits.