JVC SR-VS30U - Manual (Page 37)

Masterpage:Right-NoTitle0
EN
37
Filename [VS30U_1a-EN.fm]
Page 37 January 31, 2002 3:35 pm
Basic Recording
(DV deck)
A
Load a cassette.
Insert a Mini DV cassette with the erase protection switch
set to “REC”.
● The VCR’s power comes on automatically.
B
Select the DV deck.
Press DV.
● The DV button lights on the VCR.
C
Choose a program.
On the Remote
Press CH +/– or the number keys.
On the VCR
Push the ADVANCED JOG dial and turn it to the left or
right to select the channel you wish to record.
D
Set the tape speed.
Press SP/LP (
p
). Check the SP/LP indicator on the
VCR’s front display panel to confirm the selected tape
speed.
E
Start recording.
Press and hold REC (
7
) and press PLAY (
4
) on the
Remote, or press REC (
7
) on the VCR.
● The DV recording indicator lights on the VCR.
F
Pause/Resume recording.
Press PAUSE (
9
). Press PLAY (
4
) to resume recording.
● You can select channel during the Record Pause mode.
G
Stop recording.
Press STOP (
8
). Then press EJECT ( ) to remove the
cassette.
● The DV recording indicator turns off.
NOTES:
● It is not possible to record a TV program on both the VHS deck
and the DV deck simultaneously. However, it is possible to
record simultaneously from the same external input. Set the
input mode to “L-1”, “L-2” or “F-1” depending on the
connectors being used.
● When you record a tape on the DV deck with the recording
speed set to “LP”, it is recommended to play back the tape on
this DV deck. Digital video recorder from other manufacturers
may not be able to play back the tape properly.
Turn on the TV and select the AV mode.
1 2 3
4 5 6
7 8 9
0
2
4
1
3
T W
DV S-VHS
1 3 2
VS30U_1a-EN.fm Page 37 Thursday, January 31, 2002 3:35 PM