JVC AV-14FT11 - Manual (Page 13)

13 G E N E R A L I T E M S
SET CLOCK
The Clock is the heart of all timer
functions. You must set the clock
before any timer functions will work.
To SET CLOCK
To operate
TIME 12:34 AM
START CLOCK
To set the hour (AM/PM)
To move to minutes
To set the minutes
To move to START CLOCK when
done with settings
To start the clock
THANK YOU !!
If you want to synchronize the TV
clock with another clock or time signal,
press Left or Right Menu arrow at the
appropriate time, and the clock will start.
Note: If the TV is unplugged or you
experience a power outage,
you must reset the clock in
order for any of your timer
functions to work.
CLOCK SET MESSAGE:
If you do not set the clock but attempt to
use a timer function anyway, you will get
the following message:
PLEASE SET CLOCK FIRST !!
TIME ––:–– ––
START CLOCK
ON/OFF TIMER
Use the On/Off Timer as an alarm to
wake up, as a program reminder, or as
a decoy when you’re out of the house.
To ON/OFF TIMER
To operate
ON TIME 12 : 00 AM
OFF TIME 1 : 00 AM
CHANNEL 07
MODE ONCE EVERYDAY
ON/OFF TIMER YES NO
FINISH
To set the hour (AM/PM) you
want the TV to turn on
To move to minutes
To set the minutes
To set ON TIME and to move to
OFF TIME (set time for TV to turn
off)
To move to CHANNEL
To select channel
To move to MODE
Choose ONCE or EVERYDAY
To ON/OFF TIMER
Choose YES for on, NO for off
To FINISH
To save settings
THANK YOU !!
Note: In order for ON/OFF Timer to
work, the clock must be set.
After a power interruption it will
be cancelled.
Note: ON/OFF Timer cannot be set to
locked or guarded channels.
GGT0006-21YT11-E5 5/11/03, 9:09 AM 13