JVC VN-C655 - Manual (Page 23)

23
2-2 Setting PC's IP Address [Windows XP]
Upon installing the camera, set the IP address of the PC that is used to operate this
camera.
For Windows XP, set according to the following procedure.
(For Windows 2000,
☞
Page 25)
Ensure that it is selected.
1.
Click .
• Right-click on [My Network] and select [Properties].
2.
Slect the network for which the PC that operates this camera is connected to.
• Right-click to select [Properties].
Note
Under a DHCP environment and when the IP address assigned to V. Networks is already known,
it will not be necessary to perform 2-2 "Setting PC's IP Address" as the PC's IP address is
automatically acquired from the DHCP server.
Note
Select "Install (N) ..." if [Client for
Microsoft Networks] or [Inter net
Protocol (TCP/IP)] is not displayed.
C655(B)_p22-39 05.3.16, 5:59 PM 23