JVC AV-32T77SK - Manual (Page 31)

SET UP menu
31
AV-32/28T77SK / LCT1570-001A-U / ENGLISH
EXT SETTING
1 Choose EXT SETTING, then press
the a a a a or 3 3 3 3 button
The EXT SETTING menu appears.
2 Follow the instructions for the
function you want to use and
operate the function
y
y y y :
You can enjoy the high-quality picture of
the 2 S-VIDEO signal (Y/C signal).
ID LIST:
You can have a name for each of the
devices connected for each EXT terminal.
DUBBING:
You can choose a signal source to be
output from an EXT-2 terminal.
„ y y y y (S-VIDEO input)
You can connect a device (such as an S-VHS
VCR) to enjoy the high-quality picture of the
S-VIDEO signal (Y/C signal).
Preparation:
• First read the device’s instruction manual
and “Additional preparation” on page 34
to connect the device to the TV properly.
Second, follow the device’s instruction
manual to set the device so that it sends an
S-VIDEO signal (Y/C signal) to the TV.
• Do not set y (S-VIDEO input) to an
EXT terminal connected to a device
which cannot output an S-VIDEO (Y/C
signal). If it is set wrongly, a picture
cannot appear.
1 Press the 5 5 5 5 or 6 6 6 6 buttons to
choose an EXT terminal
2 Press the yellow button and set the
y y y y (S-VIDEO input). Then press
the a a a a button
An y (S-VIDEO input) mark is
displayed. You can view an S-VIDEO
signal (Y/C signal) instead of the regular
video signal (composite signal).
To cancel the y y y y (S-VIDEO input)
setting:
Press the yellow button and turn off y (S-
VIDEO input) mark. The regular video
signal (composite signal) pictures are
resumed.
• The EXT-1 terminal does not support S-
VIDEO signal (Y/C signal) and you
cannot set y (S-VIDEO input) in the
EXT-1 terminal.
• Setting y (S-VIDEO input) changes
the head character from “E” to “S”. When
an EXT terminal receives a normal video
signal, “E1”, “E2”, “E3” or “E4” appears
on the display. This changes to “S2” or
“S3” when it receives an S-VIDEO
signal.
• Even a device which can output an
S-VIDEO signal (Y/C signal) may output
a regular video signal (composite signal)
depending on the device setting. If a
picture cannot appear because the y
(S-VIDEO input) setting has been made,
read the device instruction manual
carefully again to check for the device
settings.
D0020-EN
EXT-1
DUBBING
EXT-2
EXT-4
TV
EXT SETTING
TV OK ID LIST
EXT-3
D0020-EN
EXT-1
DUBBING
EXT-2
EXT-4
TV
EXT SETTING
TV OK ID LIST
EXT-3
AV-32&28T77SK_Eng.book Page 31 Thursday, January 22, 2004 10:16 AM