JVC GGT0220-001A-H - Manual (Page 4)

4
Set up and connections
TV/VIDEO
MENU/OK
CHANNEL
VOLUME
150mm 50mm 150mm
200mm
50mm
VIDEO-2 R L V
1 2
Care when setting
Power lamp
ON : Lit (Blue)
OFF : Unlit
Power lamp lights
while the TV is on.
• “Power Lamp” (P. 13)
Remote control sensor
Switch between
TV / VIDEO devices
Display on-screen menu / set
Change channel / Page /
Hyper Scan Function (P. 3)
Volume / Adjust
Power On / Off
To Headphone (P. 5)
■ Power requirements
• Connect the power cord only to a 110-240V, 50/60Hz AC outlet.
■ When attaching the TV to the wall, use the optional JVC wall
mounting unit
• Consult a qualified technician.
• JVC assumes no responsibility for damage due to improper mounting.
• 200mm x 200mm mount which conforms to VESA standards.
■ Installation requirements
• To avoid overheating, ensure the unit has ample room.
• After all the connections have been made, insert the plug into an
AC outlet.
Connect an aerial and VCR / DVD Player
AERIAL
OR
VCR (DVD Player)
- If you have any problem with assembly, please contact a retailer or
a dealership.
Note: 4 screws included.
Stand Assembly
- Insert the stand into the panel at the position where the screw
holes are, and fasten the screws.