JVC HR-A51U - Manual (Page 34)

34
EN
Edit From A
Camcorder Or
Another VCR
You can use a camcorder or another VCR as the player and your
VCR as the recorder.
MAKE CONNECTIONS
1
Connect an AV cable between the camcorder’s or the
playback VCR’s VIDEO OUT and AUDIO OUT
connectors and your VCR’s VIDEO IN and AUDIO IN
connectors.
● When using a monaural camcorder or a monaural
VCR, connect its AUDIO OUT connector to the
AUDIO IN L connector on your VCR.
LOAD A CASSETTE
2
Insert the cassette to be recorded on into your VCR and
the playback cassette into the camcorder or the
playback VCR.
SELECT “EDIT” FOR PIC-
TURE CONTROL SET MODE
3
Follow the “Picture Control” section on page 21, then
select “EDIT.”
NOTE:
When you select “EDIT” to dub tapes, be sure to select
AUTO or (NORM when AUTO PICTURE is set to OFF)
after you finish dubbing the tapes.
EDITING (cont.)
Recorder
Your VCR
Player
AUDIO
IN
VIDEO IN
or
Another VCR
AUDIO OUT
Audio/Video cable
(not supplied)
Player
Camcorder
VIDEO OUT