Vm9313 dvd/vcd video operation – Jensen VM9313 User Manual

Page 21

Advertising
background image

17

VM9313

DVD/VCD VIDEO OPERATION

NOTE: When properly installed, DVD video cannot be
displayed on the main TFT screen unless the parking
brake is applied. If you attempt to play a DVD while the
vehicle is moving, the TFT screen displays “PARKING”
with a blue background. Rear video screens, if
applicable, will operate normally.

Opening/Closing the TFT Video Screen

Opening the TFT Screen

To open the TFT video screen, press the OPEN button (4).
The unit beeps and then opens.

Closing the TFT Screen

Press the OPEN button (4) again to close the TFT screen. If
the screen is in the “IN” position, it moves out before closing.

Insert/Eject Disc

Upon inserting a DVD disc, DVD mode is entered and disc
play begins.

NOTE: If Parental Lock (Rating) is activated and the disc
inserted is not authorized, the 4-digit code must be
entered and/or the disc must be authorized (see “General
Sub-menu Features” on page 10).

You cannot insert a disc if there is already a disc in the unit or
if the power is off.

NOTE: DVD-R and DVD-RW will not play unless the
recording session is finalized and the DVD is closed.

Ejecting a Disc

Press the button (14) on the unit or remote control (35) to
eject the disc. The unit automatically reverts to Tuner mode.
You may eject a disc with the unit powered off. The unit will
remain off after the disc is ejected.

Reset the Loading Mechanism

If the disc loads abnormally or an abnormal core mechanism
operation occurs, press and hold the button (14) on the
unit or remote control (35) to reset the loading mechanism.
Normal operation resumes.

Accessing DVD Mode

To switch to DVD mode when a disc is already inserted,
press the SRC button (6) on the front panel or remote control
(8) until “DISC” appears at the bottom of the screen.

Using the Touch-Screen Controls

The touch key areas for DVD playback are outlined below.

A – Displays playing information

B – Displays on-screen control menu

Controlling Playback

To access the on-screen controls, touch the bottom 1/3 of the
screen (section B). Touch the 1/2 button to view a second
page of controls

Stopping Playback

Touch the stop button ( ) on the screen or press the

button (20) on the remote control to stop DVD play.

Pausing Playback

Touch the play/pause button (

>

) on the screen or press the

>/||

button on the remote control (18) to suspend or resume

disc play.

Slow Motion Playback

Press the << button (22) on the remote control or the <<
button on the screen to play the current title in slow motion.
Keep pressing and releasing the button to increase the rate
from “2X” to “4X”, “8X”, and “20X”.

Press

>/||

(18) on the remote control or touch the onscreen

play button (>) to resume normal play.

Fast Forward Playback

Press the >> button (14) on the remote control or the >>
button on the screen to fast forward. Keep pressing and
releasing the button to increase the rate from “2X” to “4X”,
“8X”, and “20X”.

Press

>/||

(18) on the remote control or touch the onscreen

play button (>) to resume normal play.

Repeat Playback

Press the RPT button (7) on the remote control or the

button on screen to alter repeat mode according to the
following:

DVD: Repeat Chapter, Repeat TItle, Repeat Off

VCD (PBC Off): Repeat Single, Repeat Off

NOTE: For VCD play, the repeat function is not available
if PBC is on.

Sectional Repeat Function (A-B)

Use the A-B function to define a specific area of a disc to
repeat.

Press the RPT A-B button (6) on the remote control (or
the A-B button on screen) to set the start point (A) of the
repeated section.

Press the RPT A-B button again once you reach the
desired end point (B) of the repeated section. The
selected portion of the DVD will now repeat
continuously.

Press the RPT A-B button again to cancel the A-B
section setting and stop repeat play.

Random Playback

With a DVD, VCD, or CD playing, press the RDM button (33)
on the remote control to activate random playback and play
all chapters/tracks in random order. “On” appears on the
screen.

Press the >>| button (19) on the remote control to play the
next random track.

Press the RDM button again to turn random play off.

A

B

1/2

BACK

MENU

2/2

BACK

DISP

EQ

AUDIO

A-B

TITLE

SUBTITLE

Advertising