JVC DR-DX5SE - Manual (Page 76)

Filename [DX5SEU_13Subsidiary.fm]
Masterpage:Left+
76
EN
SUBSIDIARY SETTINGS
Page 76Wednesday, 23 November 2005 14:13
Delete A Channel
1
Perform steps 1 – 5 of AManual Channel SetB (A pg. 75).
2
Press selection keys to select the channel you want to delete.
3
Press CANCEL( L) to delete a channel. The channel next to the
cancelled one moves up one line.
● Repeat steps 2 – 3 as necessary.
4
Press SET UP or RETURN to close the Confirmation screen.
Change Station Channel Position
1
Perform steps 1 – 4 of AManual Channel SetB (A pg. 75).
2
Press selection keys to select AMOVEB, then press ENTER.
3
Press selection keys to select the channel you want to move,
then press ENTER.
4
Press selection keys to select the new channel position, then
press ENTER.
Example: If you moved the station in position 4 to position 2, the
stations originally in positions 2 and 3 each move down
one space.
● Repeat steps 3 – 4 as necessary.
5
Press SET UP or RETURN to close the Confirmation screen.
When Receiving A Scrambled Broadcast (HDD & DVD
Deck Only)
1
Set AL-2 SELECTB to ADECODERB. (A pg. 63)
2
Perform steps 1 – 5 of AManual Channel SetB (A pg. 75).
3
Press selection keys to select the channel position
broadcasting scrambled programmes, then press ENTER. The
Confirmation screen appears.
4
Press selection keys to select ADECODERB, then press
ENTER.
5
Press selection keys to set ADECODERB to AONB, then press
ENTER.
6
Press RETURN to return to the Manual Channel Set screen.
● Repeat steps 3 – 5 as necessary.
7
Press SET UP or RETURN to close the Confirmation screen.
Set Stations (A)
Set station names that are registered in your unit.
1
Perform steps 1 – 5 of AManual Channel SetB (A pg. 75).
2
Press selection keys to select the channel you want to modify,
then press ENTER. The Confirmation screen appears.
3
Press selection keys to select AIDB, then press ENTER.
4
Move the arrow to the left ID selection column. Registered
station names (ID) (A pg. 88) appear as you press
F G.
5
Press ENTER to select the desired ID, then press ENTER again
to select
AOKB.
6
Press RETURN to return to the Manual Channel Set screen.
● Repeat steps 2 – 5 as necessary.
7
Press SET UP or RETURN to close the Confirmation screen.
Set Stations (B)
Set station names other than the ones registered in your unit.
1
Perform steps 1 – 5 of AManual Channel SetB (A pg. 75).
2
Press selection keys to select the channel you want to modify,
then press ENTER. The Confirmation screen appears.
3
Press selection keys to select AIDB, then press ENTER.
4
Press selection keys to select the desired characters (A–Z, 0–
9, –, Z, +,
& (space)), then press ENTER.
● Enter the remaining characters the same way (maximum of 4).
5
After entering all characters, press selection keys to select
AOKB, then press ENTER.
6
Press RETURN to return to the Manual Channel Set screen.
● Repeat steps 2 – 5 as necessary.
7
Press SET UP or RETURN to close the Confirmation screen.
NOTE:
The characters available for the station name (ID) are A–Z, 0–9, –,
Z, +,
& (space) (maximum of 4).
Fine-Tuning Channels Already Stored
1
Perform steps 1 – 5 of AManual Channel SetB (A pg. 75).
2
Press selection keys to select the channel you want to fine-
tune, then press ENTER. The Confirmation screen appears.
3
Press selection keys to select AFINEB, then press ENTER.
4
Press F G until the picture appears in its best quality, then
press ENTER.
● Repeat steps 2 – 4 as necessary.
5
Press RETURN to return to the Manual Channel Set screen.
6
Press SET UP or RETURN to close the Confirmation screen.
INFORMATION
If you live in Eastern Europe,
ATV SYSTEMB setting appears
instead of ADECODERB setting on the Manual Channel Set
screen. When you can see the picture but can hear no audio,
select appropriate TV system (D/K or B/G). Normally, TV
programmes are broadcast as follows.
For Eastern Europe : D/K
For Western Europe : B/G
A Select a country in Eastern Europe in step 5 of AAuto
Channel Set B (A pg. 74).
B Press selection keys to select ATV SYSTEMB in step 7 of
AManual Channel SetB (A pg. 75).
C Press selection keys to select appropriate TV System (D/K
or B/G).
< >
PR
01 C01 ----
02 02 CTEA
03 05 1000
12 ----
05 01 9LIV
06 04 AB3
07 ----
08 ----
09 ----
10 ----
11 ----
04 3SAT
< >
PR PR PR
01 C01 ----
02 C79 3SAT
03 02 CTEA
12 ----
05 01 9LIV
06 04 AB3
07 ----
08 ----
09 ----
10 ----
11 ----
05 C79 04 05 1000
MOVE
INITIAL SET UP > MANUAL CH SET
EDIT RETURN
INITIAL SET UP > MANUAL CH SET
MOVE EDIT RETURN
CH ID CH ID CH ID CH ID
DX5SEU_00.book Page 76 Wednesday, November 23, 2005 2:13 PM