JVC TK-C2201E - Manual (Page 18)

Adjusting Image (Continued)
3 Adjust the shooting direction of the camera
Adjust the camera for pan, tilt and rotation, and face the camera towards the
subject.
.
Tilt: 80 Rotation: 100
Pan: 175
Tilt fastening screw
Shooting direction
mark
Pan center mark
Rotation center mark
Rotation knob ( 2)
Memo
v
Rotate both pan
5
175
7
and rotation
5
100
7
from the positions
aligned with the camera’s shooting direction mark, pan center mark
and rotation center mark. Be sure to hold the rotation knob and adjust
the rotation without holding the lens unit.
v
Loosen the tilt fastening screw before performing tilt adjustment.
v
After adjusting the field angle, tighten and secure the tilt fastening
screw so that the field angle will not be misaligned.
Note
v
Moving the camera beyond its adjustable range may deteriorate the
performance of this camera.
v
As this camera has a wide tilt/rotation range, a part of this camera may
appear on the screen depending on the field angle and direction.
v
Do not hold the lens unit when adjusting the camera direction.
Applying force on the lens unit may damage it.
Adjustment
18