JVC TK-C2201E - Manual (Page 9)

Setting the Switches
Before mounting the camera, set the function setting switches on the camera.
To set the switches, use a fine-tipped screwdriver.
.
MEN
U
F
.
AD
J
1 D/N AUTO
2 BLC OFF ON
3 MONITOR
TYPE
SEE INSTRUCTION
MANUAL
CRT LCD
4 NOT USED
OFF
DIP SW
Function selection
switches
DIP Switch Settings Chart
1 [D/N AUTO/OFF] Easy Day & Night Switch
Set this to "AUTO" when shooting a subject with continually changing brightness
(day/night). The image switches to color when the subject is bright, and black and
white when it is dark. The image is set to color at all times when "OFF" is selected.
(Default setting: AUTO)
2 [BLC OFF/ON] Backlight Compensation Selector Switch
Set this to "ON" when shooting in backlight. The subject becomes easier to see as
brightness is adjusted according to the photometry area set in [BLC AREA] of the
menu.
(Default setting: OFF)
Memo Refer to [BLC AREA] in the "MENU SETTING" (separate).
3 [MONITOR TYPE LCD/CRT] Monitor Type Selector Switch
Set this to "LCD" or "CRT" according to the monitor in use.
(Default setting: LCD)
Memo Refer to [LCD TYPE] in the "MENU SETTING" (separate).
Setup
9