Jabra BT2050 - Manual (Page 7)

6
EN
g
Li
Sh
Jabra bt2050
3. Your phone will find the Jabra BT2050
• Your phone will find the headset under name “Jabra BT2050”.
your phone then asks if you want to pair with the headset .
Accept by pressing ‘Yes’ or ‘OK’ on the phone and confirm with
the passkey or PIN = 0000 (4 zeros). Your phone will confirm
when pairing is complete .
JABRA BTx2050
JABRA BT2050
JABRA BTx2050
In case of unsuccessful pairing, put the Jabra bt2050 into pairing
mode manually. Make sure the headset is off. Press and hold the
on/off button for approximately 5 seconds until the LED has a
constant light.The LED will flash before the light is constant –
keep holding down the button until light is constant .
WEARiNg STyLE
the Jabra bt2050 is ready to wear . It comes with 2 ear hooks in
different sizes – a small one and a bigger one. Both are ready
to clip on . Wear the headset with ear hook or without . It is your
choice .
for optimal performance, wear the Jabra bt2050 and your mobile
phone on the same side of your body or within line of sight .
In general, you will get better performance when there are no
obstructions between your headset and your mobile phone .
hoW To
Answer a call
• Tap the answer/end button on your headset to answer a call.
End a call
• Tap the answer/end button to end an active call.