JVC AV 36F802 - Manual (Page 19)

Remote Programming
VCR codes
The remote control is prog rammed with VCR codes for power on, power off, play, stop,
fast-forward, rewind, pause, record, channel up, and channel down operation.
1) Find the VCR brand from the list of codes shown below.
2) Slide the first 2-way selector switch to “TV” and the other 2-way selector switch to “VCR”.
3) Press and hold down the D
ISPLAY button.
4) With the D ISPLAY button held down, enter the first code number listed with the 10 key pad.
5) Release the D ISPLAY button.
6) Confirm the operation of the VCR.
• If your VCR does not respond to the first code, try the others listed. If it does not respond to
any code, try the Search Codes Function, on page 50.
• Some manufacturer’s VCR’s may not respond to the TV/VCR button, even if other buttons
work properly.
• To record, hold down the R EC button on the remote and press P LAY .
19
AV-27,32,36F7/802 A 9/4/01 9:44 AM Page 19