JVC GGT0312-002A-H - Manual (Page 13)

13
Confi guring your remote control
TV STB
AUDIO BD/DVD
You can confi gure your TV’s remote control to
operate your other devices.
Confi gure your remote control.
1. Turn on the device manually.
2. Switch the remote control mode that matches
your device. Refer to the table on the right to
select an appropriate mode.
• If your device does not respond, try all the available codes for the
device’s brand.
• If none of the code works, or the brand is not listed, refer to “Using the
search code function” (P. 14).
MODE Applicable devices
TV This TV only
STB Cable Set Top Box, Cable/PVR Combination,
Satellite Set Top Box, SAT/PVR Combination
BD/DVD DVD, Blu-Ray DVD, HD DVD, DVD-R, Home
Theater in Box, TV/DVD Combination
AUDIO Amplifi er, Receiver, Home Theater in Box
Note
• The indicator lights for 3 seconds each time the
remote control is operated.
3. Find the remote control code for your device
according to its brand from the “Remote
control codes” manual.
4. Set the remote control code.
5. Point the remote control at your device, press
and confi rm that your device is turned
off. If your device does not respond, try
entering another available code.
Press and hold Enter four digit
number Release the
button
GGT0312-002A-H-EN.indd 13 GGT0312-002A-H-EN.indd 13 6/1/09 10:03:20 AM 6/1/09 10:03:20 AM