Setting the house security code – Jasco 19242 User Manual
Page 3
Advertising
-
Pushbutton Dip Switches and Jumpers
Setting The House Security Code
Each chime component has 4 jumpers for setting the house security code.
In most cases you will not need to change the factory settings for the house
security code. If your chime activates intermittently or does not work at all,
you may be able to solve the problem by changing your security code.
1. Remove power or batteries from the chime.
2. To remove the batteries from the pushbutton, open the pushbutton case
as shown below.
3. Locate the House Security Code door and screw located on the
Chime Dip Switches
(Ding Dong Shown)
House Code Jumpers
Advertising