Standby receptions, Tracing the same programme, Automatic station selection – JVC GET0635-003A User Manual

Page 70

Advertising
background image

8

ENGLISH

Standby receptions

TA Standby Reception

TA Standby Reception allows the unit to switch
temporarily to Traffic Announcement (TA) from
any source other than AM.
• The volume changes to the preset TA volume

level if the current level is lower than the
preset level. (<TA VOLUME>,

15)

To activate TA Standby Reception

If the TP indicator lights up, TA
Standby Reception is activated.
If the TP indicator flashes, TA
Standby Reception is not yet
activated.

• To activate the reception, tune in to another

station providing Radio Data System signals
required for TA Standby Reception.

• To deactivate the reception, press T/P BACK

again.

PTY Standby Reception

PTY Standby Reception allows the unit to
switch temporarily to your favourite PTY
programme from any source other than AM.

To activate and select your favourite
PTY code for PTY Standby Reception,
see
<PTY-STANDBY> (

15)

If the PTY indicator lights up, PTY Standby
Reception is activated.
If the PTY indicator flashes, PTY Standby
Reception is not yet activated.

• To activate the reception, tune in to another

station providing these signals.

• To deactivate the reception, select <PTY OFF>

(

15) for the PTY code. The PTY indicator

goes off.

Tracing the same programme—

Network-Tracking Reception

When driving in an area where FM reception is
not sufficient enough, this unit automatically
tunes in to another FM Radio Data System
station of the same network, possibly
broadcasting the same programme with
stronger signals.

Programme A broadcasting on different
frequency areas (01 – 05)

To change the Network-Tracking Reception
setting, see <AF-REG> (

15).

Automatic station selection—

Programme Search

Usually when you select a preset number, the
station preset in that number is tuned in.
If the signals from the FM Radio Data System
preset station are not sufficient for good
reception, this unit, using the AF data, tunes in
to another frequency possibly broadcasting the
same programme as the original preset station
is broadcasting. (<P-SEARCH>,

15)

Changing the display information

Station name (PS)

= Station

Frequency

= Programme

type (PTY)

= Clock = (back to

the beginning)

EN02-11_KD-R511_003A_3.indd 8

EN02-11_KD-R511_003A_3.indd 8

11/24/09 5:15:18 PM

11/24/09 5:15:18 PM

Advertising
This manual is related to the following products: