Ptz camera control (continued) – JVC VR-N1600E User Manual
Page 140
132
Ⅵ Pan/Tilt
Ⅵ Zoom
Ⅵ Iris
Ⅵ Focus
Ⅵ Speed
For setting the movement speed of the PTZ action to eight
different levels. (1 represents the slowest speed)
Ⅵ Preset
Ⅵ Scene
Ⅵ Night Mode
Ⅵ Menu
Ⅵ Exit
Exits PTZ camera control
Memo :
● You can use the [SKIP] buttons to change the item to
control.
● You can also use the cursor buttons on the keypad to
control movement in the direction indicated by the
respective buttons.
● You can use the [13/CANCEL](ZOOM OUT/CANCEL)
button to exit the PTZ camera control mode.
`
Note :
● If you are unable to establish connection with the camera
by clicking the [Connect
ENTER)] button, try again after
stopping and rebooting the recording server. (APage 81
PTZ Camera Control
(continued)
: Tilts the camera upwards
: Tilts the camera downwards
: Pans the camera to the right
: Pans the camera to the left
: Zooms out
: Zooms in
: Opens the iris
: Closes the iris
: Sets the focus to a distant position
: Focuses automatically
: Sets the focus to a closer position
Position
Selection
: Select HOME or a different position.
:
For moving to the position selected using
Position Selection
:
For registering a position selected using
Position Selection as the current position
Scene
Selection
: For selecting a scene between A to H.
:
For setting a scene selected using Scene
Selection
: Turns on the night mode
: Turns off the night mode
: Displays the PTZ camera menu
: Selects the PTZ camera menu
: PTZ camera’s menu (Up cursor)
: PTZ camera’s menu (Down cursor)
: PTZ camera’s menu (Right cursor)
: PTZ camera’s menu (Left cursor)
VR-N1600_J.book Page 132 Tuesday, June 3, 2008 2:26 PM