JVC UX-MD9000R - Manual (Page 7)

3
English
CAUTION: Make all connections before plugging the System into an AC power outlet.
Using the Supplied Wire Antenna
Using the Coaxial Type Connector (Not Supplied)
$ýæèðRKPýDQWHQQDýZLWKýFRD[LDOýW\SHýFRQQHFWRUýõ,(&ýRUý',1йиэклиф
VKRXOGýEHýFRQQHFWHGýWRýWKHý)0ýæèðRKPý&2$;,$/ýWHUPLQDOï
,IýUHFHSWLRQýLVýSRRUñýFRQQHFWýWKHýRXWVLGHýDQWHQQDïý
Note: Before attaching a 75 ohm coaxial lead (the kind with a
round wire going to an outside antenna), disconnect the sup-
plied FM Wire Antenna.
CAUTION: To avoid noise, keep antennas away
from the System, the connecting cord and the AC
power cord.
Connecting the FM Antenna
AC IN
R
OPTICAL
DIGITAL IN(AUX2) SUB WOOFER
OUT
L
FM wire antenna (supplied)
Coaxial cable
FM outdoor antenna
(Not Supplied)
Connecting the AM (MW/LW) Antenna
AC IN
R
OPTICAL
DIGITAL IN(AUX2) SUB WOOFER
OUT
L
Attach the AM loop to its base by snapping the tabs on the
loop into the slot in the base.
AM loop antenna (Supplied)
AM EXT AM
LOOP
ANT
75
FM
ANT
Turn the loop until you have the best reception.
Ux-MD9000-e.fm Page 3 Tuesday, June 23, 1998 9:38 AM