JAI TM-2016-8/8CL - Manual (Page 13)

Page 3
TM-2016-8 and TM-2016-8CL Progressive Scan Shutter Camera
Introduction
The TM-2016-8 captures async reset images and provides single-shot video output with single
FDV. This makes it simpler for an ordinary frame grabber to capture the async reset images.
• Read Out Inhibit (ROI)
When Asynchronous no-delay shutter mode is selected, it activates the ROI function. With the
ROI-controllable pulse to 11-pin input, externally controlled readout of the data is available.
• Extra VINIT trigger rejection during the valid frame readout
This avoids incomplete frame data when too many trigger pulses are applied within the same frame
period.
• Integration
The TM-2016-8 is capable of capturing high-resolution integration images. Its CCD imager can be
exposed for longer than the normal scan timing of 1/8 sec. This integration feature provides extra
sensitivity for applications in dark environments. The progressive scan imager permits a full frame
of resolution in non-interlace format. Integration is achieved by controlling the #11 pin of the 12-
pin connector to low (GND) or pulse width control VINIT to pin #6.
• Output
The TM-2016-8 has an 8-bit RS-644 digital output for interfacing with external image-processing
systems. The Camera Link model is called TM-2016-8CL. Please contact your JAI, Inc.
representative for details on these options and models. The analog output is 1.0 Vp-p composite
video (75¾).
• Three-Year Warranty
The CCD solid-state image sensor allows the camera to maintain a superior performance level
indefinitely while requiring virtually no maintenance. JAI, Inc. backs all of the TM-series cameras
with a three-year warranty.
Warning: Unscrewing the camera cover or opening the camera in any
way will void this warranty unless prior written approval is
obtained from the factory.
1.3 Functional Options
• Adjustable back-focus front end.
• Pixel clock locking *
*. Pixel clock locking not available at time of publishing. Please check with JAI, Inc. for current
availability.