Jackson Whirl Wizard - Manual (Page 12)

ELECTRICAL POWER CONNECTION:
1. The Whirl Wizard requires a dedicated 20 amp, 115 volt single phase circuit.
2. A 20 amp NEMA 5-20R receptacle is required for the NEMA 5-20P cord set
and plug shipped with the machine.
CAUTION: A NEMA 5-20R RECEPTACLE IS REQUIRED. IF NOT AVAIL-
ABLE A QUALIFIED ELECTRICIAN SHOULD INSTALL THE CORRECT
RECEPTACLE.
Whirl Wizard Technical Manual 7610-011-70-65
Issued: 08-20-2007 Revised: N/A
SECTION 2: INSTALLATION/OPERATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS (CONTINUED)
6