GE 24914 GE Universal Remote - Manual (Page 11)

11
Using Your Remote, cont.
Controlling Devices with Separate Power
On and Off Buttons
Some GE, RCA and ProScan models require you to
press the device button for more than one second to
turn the device on and the ON•OFF button to turn the
device off.
Controlling Combo Devices
Some Combo devices (e.g. TV/VCR, TV/DVD, DVD/VCR,
etc.) will require you to set up two different Mode
buttons to control both parts of the Combo device.
For example, if you have a TV/DVD Combo, you might
need to set up one code under the
TV button to
control the TV part AND a separate code (under any
other Mode button) to control the DVD part.
VCR/DVD Punch-Through
This remote allows the 6 VCR transport buttons
(i.e.
PLAY, PAUSE, STOP, FF, REWIND, and REC) to
Punch-Through control from any Mode programmed
with TV, SAT or Cable codes to the last
VCR, or DVD
programmed Mode you used. This feature will not
operate if the programmed TV, SAT or Cable code has
its own VCR transport button control e.g. a TV Combo,
SAT/PVR, etc.