JVC 0708TSH-II-IM - Manual (Page 8)

8
Disconnecting the stand
1) Place the TV face down on a soft cloth on a table.
2) Remove the screws from the back of the TV.
3) Pull out the stand from the TV.
Notes:
• To re-install the stand, reverse the procedure from 3) to 1).
• If you fi nd it diffi cult to remove the screws from inset screw wells, use a magnetized
screwdriver.
Precautions
* In the case of placing the 52” TV on the wall, please follow the next steps.
1) Remove the TV base from the upper body
of the stand.
2) Attach the upper stand body to the TV.