JVC RD-T7RGN - Manual (Page 8)

5
RD-T7RGN/RD-T5RBU(B) / LVT0737-007A / English
■ ■
Using the Tuner
You can listen to FM and AM (MW) stations. Stations can be tuned
in manually, automatically, or from preset memory storage.
One Touch Radio (AC power only) —
Just press the TUNER BAND button to turn on the Unit and start
playing the station you were last tuned to.
■
You can also switch from the CD Player to the radio by pressing
the TUNER BAND button.
■
1. Press the TUNER BAND button.
The Band and Frequency you were last tuned to appear on the
display.
Each time you press the button, the band changes as follows:
■
2. Select a station using one of the following
methods.
■
Manual Tuning
Press the 4 or ¢ button repeatedly to move from frequency
to frequency until you find the station you want.
OR
■
Auto Tuning
If you press and hold the 4 or ¢ button for one second or
more, the frequency changes down, or up, automatically until a
station is found.
OR
■
Preset Tuning using the Unit (Possible only after pre-
setting stations)
Press the
7 P.TUNING button to select the preset station.
After you have selected the preset number, the band and the fre-
quency are displayed.
•
Example:Press the 7 P.TUNING button until the preset
number 12 “P- 12” appears.
OR
■
Preset Tuning using the Remote Control (Possible
only after presetting stations)
Select the station by entering its preset number on the number
keys.
•
Example:For channel 5, press 5. For channel 15, press +10
then 5. For channel 25, press +10 twice, then 5.
For channel 30, press +10 twice, then 10.
• The band and the frequency are displayed.
■
3. Turn the antenna for best reception.
• For FM broadcast, extend the built-in wire antenna.
• For AM broadcast, turn the Unit itself.
You can preset up to 30 FM stations and up to 15 AM (MW) stations
into memory.
Auto Presetting (Using the Unit) ——
In each band, you can automatically preset FM-30, AM (MW)-15 sta-
tions. Preset numbers will be allocated as stations are found, starting
from the station currently tuned to and moving up the frequency.
■
1. Select a band (AM or FM) by pressing the
TUNER BAND button.
■
2. Press the TUNER BAND button for more
than 2 seconds.
“AUTO” appears, and then auto presetting starts.
■
3. Repeat steps 1-2 for the other band.
■
If you want to change any of the auto preset stations, follow the
procedure for Manual Presetting.
CAUTION: To prevent the preset stations from being
erased because of a power failure, etc., install mem-
ory backup batteries in the System.(See page 2.)
Otherwise, they will be erased in approx. half a day.
REMOTE CONTROL RM-SRDT7
VOLUME
BASS/TREBLE
BAND
FM MODE
TUNER CD
SLEEP
AHB PRO
REPEAT
4 5 6
1 2 3
10 +10
7 8 9
SNOOZE
P.TUNING
TUNER BAND CD
RANDOM/ REPEAT BASS/ TREBLE
MULTIJOG
VOLUME
AHB PRO
SNOOZE/DIMMER
CD/TUNER ALARM
TIMER
SLEEP CLOCK/ DISPLAY
STANDBY
STANDBY/ON
CD PORTABLE SYSTEM
4 ¢
■ P.TUNING Number keys
Band display, Frequency display, Preset channel
RDS indicator
TUNER BAND
[RD-T7RGN Only]
TUNER BAND
¢
4
(Display when using the Tuner)
CLOCK/DISPLAY
Tuning In a Station
FM AUTO FM MONO AM
P.TUNING
or
Presetting Stations
For FM For AM
TUNER BAND TUNER BAND
(for 2 seconds)
RD-T5RBU&T7RGN(B).book Page 5 Tuesday, May 22, 2001 3:54 PM